Dear Sirs,
We are configurating RDP web cliente.
We want to redirect the port 443 from 4040 but when we change this port, the gateway not open the port.
There is any posibily to change this port.G
Gateway server is a public dns (in order to not use VPN) but in this server, we can add the port.
Best Regards
We have a Windows 2012 R2 RDS environment that we have been using successfully for sometime for our ERP solution. We recently made an acquisition and discovered that their primary subnet was the same as the subnet we use for our server environment. We working to make changes, but in the mean time we have setup NAT rules on each end of a point to point connection facility normal traffic, and a trust between the domains. This is all working wonderfully, until we got to allow users on their side of the connectivity to our ERP solution through RDS.
Out Environment
1 RDS Connection Broker
1 RDS Licensing Server
1 RDS Web Access Server
6 RDS Session Hosts (Prod)
1 RDS Session Host (Test)
Some of the testing appears to show the RDS Connect Broker communicating with the Client, up until point that it attempts to redirect the client to the Session Host. We see the Client starting to broadcast a Who Is for the actual IP of the Session Host. Which of course is going to fail, both client and Connection Broker then time out trying to communicate.
My Question: Is the RDS Connection Broker redirecting bases off of the IP or FQDN of the Session, and if it is by IP, is there a way to have it use the FQDN.. other input and suggestions are also welcome.
Hi All,
I installed the RDS server 2016 and activated the license but still it is giving error in RD license diagnose " Licenses are not available for the remote desktop host session server"
error details:
The Remote Desktop Session Host server is in Per Device licensing mode and No Redirector Mode, but license server localhost does not have any installed licenses with the following attributes:
Product version: Windows Server 2016
Thanks,
Agha
Hi,
We have just start to add extra capicity, for our RDS enviroments.
Previous we had 2 connection brokers, and 1 server hosting the Gateway / Web access server.
We then added 2 new gateways, to replace the old one, and planned on using HAProxy as the load balancer, in front of the 2 new gateways.
When users are logging into the RDWeb on the old Gateway server, they are presented with the RemoteApps, that they have in the collection, that the user belongs to.
When users are logging into the RDWeb on the new Gateway servers, they are presented with ALL the remoteapps, that is available accross all of the RDS collections.
We are 100% sure, that the new Gateways and the old Gateways, are in the same RDS "environment" - and can see all the servers, when looking at the SQL database for the brokers.
Normally we would look at the Domain groups, since all the RemoteApps are available - but then the user should see all the RemoteApps, when logging into the old Gateway server as well.
The only error code, that ive found so far are these:
Connection Brokers:
RD Gateway Configuration Failed on rdsgw3.domain.local With Error: Failed to create RAP for RD Connection Broker Computers group. Error = 2147749913
RD Gateway Configuration Failed on rdsgw3.domain.local With Error: Failed to create new RD Connection Broker Computers group. Error = 2147749913
RD Gateway Configuration Failed on rdsgw3.domain.local With Error: Failed to create RAP for Domain Computers group. Error = 2147749913
But the policies are being created correctly, and are present when looking.
rdsgw3.domain.local
The connection authorization policy "RDG_CAP_AllUsers" could not be created. The following error occurred: "183".
The resource authorization policy (RAP) "RDG_AllDomainComputers" could not be created. The following error occurred: "183". To resolve this issue, ensure that you have configured RAP settings correctly and set the correct value and permissions for the RAP.xml file and the RAPStore registry key.
The resource group "RDG_RDCBComputers" could not be created. The following error occurred: "183". To resolve this issue, ensure that you have configured resource group settings correctly and set the correct value and permissions for the RAP.xml file and the RAPStore registry key.
The resource authorization policy (RAP) "RDG_RDConnectionBrokers" could not be created. The following error occurred: "183". To resolve this issue, ensure that you have configured RAP settings correctly and set the correct value and permissions for the RAP.xml file and the RAPStore registry key.
The resource group "RDG_DNSRoundRobin" could not be created. The following error occurred: "183". To resolve this issue, ensure that you have configured resource group settings correctly and set the correct value and permissions for the RAP.xml file and the RAPStore registry key.
The resource authorization policy (RAP) "RDG_HighAvailabilityBroker_DNS_RR" could not be created. The following error occurred: "183". To resolve this issue, ensure that you have configured RAP settings correctly and set the correct value and permissions for the RAP.xml file and the RAPStore registry key.
We cant seem to find the answer to this, so any help is much appreciated!
hi I have configured rds gateway on windows 2012 , one server having all rds role ( connection broker, webapp,rdgateway & remote desktop session host ) as per this kb :https://www.lemonbits.com/2014/06/20/installing-standalone-remote-desktop-gateway-on-the-windows-server-2012-r2-without-complete-remote-desktop-services-infrastructure/
after that now i am getting remote desktop services temporary unavailable .
Reviewed all setting :removed port 80
Internally using RDWeb works ok.
I have added the certificate in Gateway Manager
Windows 10 VMs - I created a new Win 10 2016 LTSB (1607) template from scratch, applied all updates, sysprepped - just like I would do with the previous template which was Win 10 ent 1804 (not LTSB). Anyway, when I execute "recreate all desktops in pool" and point to the new template, it takes a long time, then eventually fails. The first VM's status is Post-patch failed, all others are job canceled. I'm looking through the Hyper-V logs, but nothing jumps out at me. In fact, the only entry I see is for the one that Post-patch failed.
I've confirmed that the VM did export as a template.
Log: Microsoft Windows Hyper-V15 Worker/Admin
Event ID: 18510
'BASE-0' saved successfully. (Virtual machine ID 741112D6-0B23-4521-8C8F-7ECA9E144843)
Any idea where I should look to see what's happening?
Edit: I closed the wizard and then launched Task Status and now get a bit more information for the VM that Post-patch failed - "Failed: The virtual machine is not ready for the virtual machine-based desktop deployment."
My gut instinct is I can't downgrade win 10 VMs from 1804 to 1607, time to find out what google thinks.
Edit 2: Setup a new resource pool, pointed it at my new template, same errors.
Edit 3: Hyper-V-VMMS/Admin, Event ID: 15090 'BASE-0' failed to modify resources.
hello,
When I deploy a remoteapp server under Windows Server 2012 r2, after the RDS server is deployed, DirectX can be used normally when I login to the server locally, but when using another windows server 2012 with rdp8.1 protocol, I login to the session server
remotely, using dxdiag command, and find that only Directx3d is enabled. Directxdraw acceleration and AGP texture acceleration are not available.
Gpedit. MSc > remote session environment: configure remotefx, optimize visual experience when remotefx is used, optimize visual experience for remote desktop service session, use advanced remotefx graphics for remoteapp, configure image quality of remotefx
adaptive graphics, configure remotefx adaptive graphics, and use hardware for all remote desktop service sessions Default graphics adapter.
All of these have been set up.
I have deployed another server successfully before, Directx3d function can work, but this one can not work, there are hardware differences between the former using NVIDIA Quadro k4000 graphics card, the latter using NVIDIA geforce GTX 1060 graphics card.
is there any omissions in the deployment process?
thanks.
Hi,
For a VDI system (Win 10 or Server 2016 Remote Desktop Services) it's necessary to prevent access to the power functions (reboot, shutdown). This can be done during GPO:
User Configuration > Administrative Templates > Start Menu and Taskbar > Remove and prevent access to the Shut Down, Restart, Sleep, and Hibernate commands.
But his only removes the commands itself. The power button remains which confuses the users.
Is there a way to completely remove the power button in Windows 10 and Server 2016?
br, Patrick
Hi all,
I'm trying to setup high availability in a 2016 Connection Broker server using as DB an existing SQL 2016 Cluster Always On AG.
I created a new DB on the SQL Server and added it to the AG (also tried without adding it to the AG); created a new sql logon and given db_owner and securityadmin permissions to the new DB. I can access the DB from both SSMS and SQL Client from the RDCB server, but when I try to configure HA using shared server I get this error message:
"The database specified in the database connection string is not available from the RD Connection Broker server".
I also tried to create HA using dedicated server, but login fails with the same error even if I add the RDCB server to SQL Server with sa permissions.
This is the connection string I'm using:
Driver={SQL Server Native Client 13.0};Server=sqlcluster_dns_name;Database=ClusterRDS;Uid=user;Pwd=password;Encrypt=yes;TrustServerCertificate=yes;Connection Timeout=30;MultiSubnetFailover=yes;I also tried with Native Client 11, nothing changed. Both clients (11 and 13) are installed on the RDCB Server and I can configure a connection from ODBC data sources.
Firewalls are off everywhere.
Any idea? Am I missing something?
Thank you,
Marco
I'm using COM port redirection via RDP. If I assign a COM port number smaller than 32, redirection works fine. I log on to the server and access the device that is connected locally. However, if I assign a COM port greater than 32, I can't access the device from RDP. I get an error "The port COM100 does not exist".
So, is there some limit to RDP com port redirectoions?
Our users log into a 2016 terminal server with roaming profiles - set in Group Policy to remove profiles upon logging off.
We have been having a few profile issues, and having looked into it, when the user logs off, part of the profile is being left behind (c\users\username\appdata\roaming\appname). Then when the user logs back on again, it creates a new profile entry (username.domain.001, username.domain.002, username.domain.003, etc).
Is there a way to stop this from happening? It seems that an application isn't closing down correctly when the user logs off, and then leaves some files behind (unfortunately this is an app that our users need).
Any ideas??
We have a remote office that has about 5 users that use a remote desktop connection back to our main office to access an Access database. There are normally two or three in here at all times and normally there are no issues. We have a 100Mbps connection between offices and the server is 2008R2 running the Terminal Services.
I have one computer that types extremely slow but only when using Access on the Terminal Server. Word/Excel work fine as does notepad and any other program. For some reason it is only Access through Terminal Server. I can have this user go to another computer and it works fine. I can have this same user log on as someone else at her computer and it still runs slow. It is just the remote desktop connection from this one computer and only when using Access.
Has anyone seen anything like this?
Hi All
I have VDI working successfully internally and have now created the RDS Gateway Server (all on Windows Server 2012) in the DMZ for remote client access. I've created the CAP and RAP policies, and have also registered the required web, however when attempting connection I get presented with the default IIS 7.0 web site splash page.
How do I connect the RDS GW Servers services to the IIS URL, so that users connecting are presented with the VDI web login page?
Any thoughts much appreciated!
Greetings everyone. I test new RDS (Remote Desktop Service). After a farm deploy (without any errors) rdweb doesn't work.
IE show 503 error -
This new test domain without any domain policy.
I try explore IIS - https://blogs.msdn.microsoft.com/webtopics/2010/02/17/a-not-so-common-root-cause-for-503-service-unavailable/
Thank you all for any help you could provide me.
Regards,
Hello,
We have a couple of users in IT using Surface pro's.
When connecting to apps via RemoteApps they get a security pop up....
"The Credentials that were used to connect to "Server name" did not work. Please enter new credentials.
It has the correct user name already. and if i enter the password then it connects fine.
If connecting to apps on a windows 10 or windows 7 laptop we get no security pop up the app just opens up as expected.
It's only on the surface.
Not sure why this is just happening on the Surface?
We have a XenApp 6.5 server farm which of course relies on RDS CALs and other things RDS.
How do I set up a new Win2k16 *TEST* RDS farm such that it does not conflict with anything involved with the XenApp farm??
For example, how should I specify where the test farm's TS/RDS profiles go, how should I do folder redirection for the test farm, etc.?? -- anything else?? -- can I use the same licensing server as used for XenApp?? (all the RDS licenses are entered therein)
We plan to replace XenApp 6.5 next year with an RDS farm anyway, so these questions must be answered and planned for. :)
I know I could do a single-server RDS farm but I want to be adventurous and try 1 gateway, 1 broker, 2 hosts with apps installed, serving a full desktop.
Thank you, Tom
External users are able to remote in using Remote Desktop however RD Gateway still shows green under Server Manager.
on the router, I forwarded port 3389 to the RDS server.
do I need to click the plus sign and create a Gateway?
Thank you.
How can I enable unlimited full control shadow session like view only shadow session. I have enterprise license cals is not problem.
Thanks in advance for your help and support in this matter.
I am getting the error.
Hello,
I just created new 2016 RDS Session Base environment where I have two servers. 1st Server has RDS Web Services, RDS Gateway, and RDS License Role and 2nd Server has RDS Session and RDS Broker role. I have configured the way I want it and created DNS Alias for server 1 which is the gateway server rds.domain.com and I have all the configuration setup correctly but I don't seem to get connected RDS Sessions/Broker server when I type in the rds.domain.com. It logs into server number 1 instead of server number 1. I don't know if I am setting this up wrong or I need the broker and gateway role on same server? any help would be appreciated.
Thank You
Nilay Joshi